|
Wood Working/Wood Industry Equipment (Used) : AVAILABLE TO SELL
Location: USA, SOUTH
WEEKE, BHC 550, CNC P.T.P. Machining Center w/ATC.
~~ Work area cap.: X-axis: 4,241 mm Length, Y-axis is 1,295 mm and Z-axis 100 mm; head travels on THK linear motion guides on all axes, feed speed on X-axis is 263 FPM, Y-axis 196 FPM and Z-axis 64 FPM.
~~ Boring unit with (19) independent vertical spindles, (9) in X-axis, (8) in Y-axis and (2) extra boring spindles parallel to the X-axis for 35 mm tools; (4) horizontal spindles in X-axis for edge boring in the left- & right-hand panel edges and (2) spindles on the Y-axis for edge boring in the rear panel edge.
~~ Equipped with: (1) 12 HP High speed, vertical water cooled router with ATC, (1) ride-along 8-tool tool changer magazine (HSK-F63 tool holders), (1) additional 8-tool tool changer (HSK-F63 tool holders), powered by an 14 kW frequency inverter w/programmable 9,000 - 18,000 RPM constant power spindle speed, RH or LH rotation.
~~ Includes: 2 HP Grooving saw in X-axis only, 100 mm dia. saw blade; worktable with (8) moveable support rails with automatic positioning through WOOD-WOP 4.5, (18) 145 x 145 x 36 mm vacuum cups and (6) 145 x 75 x 36 mm vacuum cups; (4) programmable back stops, (8) programmable front stops, (2) movable pneumatic side stops, and the dual central zero-stop create (2) working zones.
~~ HOMATIC 2000. Windows based 486/66 MHz controller; the PC software is not copy protected and can be installed on as many PC's as you like; fully compatiable and integrated with HOLZMA's CutRite.
~~ Complete with: 100 cbm/Hr BECKER Vacuum pump, man-height safety enclosure around rear & sides of machine, 2-zone safety mats (will stop machine if operator enters work area). [Ref. #BP-011327]
~~ YMFG: 2003,
Good Condition
Listing ID: LA887294
|
|
