Printing Equipment (Used) Newsgroup

Location: UKRAINE, DNEPROPETROVSK

Automatic folder gluer UFG-400.
ParameterIndex Maximum size of workpiece 2200 x 1000 mm Minimum size of workpiece 680 x 320 mm Type of material three - five-layer cardboard, profiles A, B, C, AB and BC Type of folding Down Number of Valco applicator glue lines 3 The width of the adhesive roller 40 mm The number of orders in memory 250 Maximum speed of belt 120 m/min Maximum speed gluing up to 240 sheets per minute (depending on the format of blank) Total weight 13 500 kg Summarized power 35 kW (operating power of 5-10 kW) Voltage 380 V Mains current alternating three-phase Frequency 50/60 Hz Overall dimensions 12000 x 3600 x 2400 mm The speed automatic folder gluer model UFG-400 is used as stand-alone unit, complete with automatic feed and is designed to perform the following operations: • Automatic feeding, • gluing, • folding, • alignment • counting and stacking. The line is manufactured with the «touch screen» panel. The machine works with a 3-and 5-multilayer corrugated cardboard, it has a high degree of automation and a high-class equipment that minimizes setup time line to change orders. Built-in memory lets you save settings for up to 250 samples of various orders. Built-in function returns the settings to zero. Specifications 1. Feeding Section The belt feed with a vacuum clamp. Rear height adjustable guides for smoother, more convenient submission of blanks, specially manufactured high-quality straps submitting to provide high adhesion to the work piece. The front stoppers are configured to any type of corrugated cardboard. Equipped with two side guides. 2. Glue sectionSimple and reliable design; Independent circulation system allows the glue to avoid its drying out when stopping the machine, easy to clean Additionally line is equipped with extrusion adhesive system Valco (USA) which applies glue accurately to the pre-set distance on workpiece, preventing glue flow away and overdoze. Glue is applied in three narrow separate lines, instead of one wide, which allows to save in glue expense twice, comparing to roll system. 3. Folding section Initial folding of work-piece is made at an angle of 90 degrees, which allows to increase quality and accuracy of folding; The speed of each of the lower rebate belt is regulated separately, thus avoiding the effect of “fish-tail”; Equipped with extra folding belts that enhance the quality of the alignment geometry of the box. 4. Section of bunch-forming and stacking UFG is equipped with electromechanical adjustment to the width of the box. The best folding is provided by the strong airflow created by the centrifugal supercharger. Adjustment of the centrifugal blower is motorized. The stopper serves to align boxes after folding. The transportation to the counter-ejector is made by vacuum conveyor belts. The simple and reliable system of counting blanks and forming packs.Machine was used as helpful, not as main. Condition: perfect.