Wood Working/Wood Industry Equipment (Used) Newsgroup

Location: USA, MIDWEST

Cutoff Saw (Optimizing) -DIMTER.
DIMTER, Opticut S-90 Speed. - Working dimensions: 4 in. Thick x 9 in. wide max. incoming board cap.; min. cap. 3/4 in. x 1 in. wide. ~~ Highly accurate Push Feed Saw, right-hand version (material feeds from right-to-left), 16 in. min. to 14-3/4' max. infeed board lengths, 3 in. min. to 14-3/4' max. outfeed lengths. ~~ Equipped with: 10 HP Arbor motor driving 20-1/2 in. dia. blade with 30 mm bore at 2,900 RPM. ~~ Infeed system with: Precision, Servo controlled pusher bar motor, 295 FPM max., travels full length of board, reading crayon marks for cut to length, optimization & defecting marks. ~~ Pusher arm automatically positions itself after measuring the board and precisely feeds the board into the saw with positioning accuracy of +/- 0.004 in. & cut accuracy of +/- 1/64 in. ~~ Waste gate for discharge of waste items from saw cuts. ~~ Marking Station: Attached to the transport section; easily accepts incoming lengths up to 14-3/4'. ~~ Saw uses (2) pneumatically operated side hold-over rolls before-and-after the saw blade. ~~ Computer controlled holddown shoe ensures stock is securely held in position during cut; holddown, hold-over devices, and precision Servo controlled pusher arm provide square, accurate, and high-quality cuts - even on large cross-sections. ~~ Programmable controls for cut lists, optimizing for yield and defecting capability. ~~ Sort line with 2 HP motor driving a 10 in. wide x 23' long belt with (2) mechanical ejectors; encoder permits accurate sorts according to width, length or grade. ~~ End of belt can also be used in an additional sort for long fixed length parts, finger joint blocks, or long waste. ~~ Includes: Label Printer with software package. Allows a label to be placed on each individual cut piece for identification later on; 110 Volt AC power requirements. ~~ MILL VISION Software NOT included, but can be added; acts as a link between design software such as CabinetVision or Cabinetware and the Optimizing Saw; works in conjunction with the included Label Printer to identify parts. - Print statements can include job name, unit name, part dimensions, or any unique identifier. ~~ Includes the width measurement option; allows random width boards to be run and sorted according to different cut bills. - [Ref. #SO-010186]~~ They don't come any NEWER - except from the Factory. - Plus, take advantage of the exchange rate and buy Used in the USA! ~~ YMFG: 2006; Excellent condition