China's Recycling Marketplace
  Welcome to Scrap China - China's Recycling Marketplace.
[ | Main Menu | Add Listing ]

Wood Working/Wood Industry Equipment (Used) Newsgroup


EXPIRED LISTING - submitted on 2008-08-26.
Details and prices quoted are no longer current or valid.
Wood Working/Wood Industry Equipment (Used) : AVAILABLE TO SELL

Location: USA, WEST COAST

Spray Machine - GIARDINA, 4' Dualtech 601 .
Super Controlled Finishing. - Complete 51 in. Finishing Line designed for stain, sealer & topcoat for finishing Curing with hot water boiler for the Air Makeup system to control the input air to balance and guarantee a clean spray area and ovens. ~~ Includes (4) positions - #1: Infeed load conveyor; #2: Panel cleaning blow off unit with De-ionizing air nozzles; #3: Automatic 8-Gun 2-Spray circuit Reciprocating Sprayer and outfeed conveyor; #4 Out feed conveyor with Lexan cover.~~ Product Specifications: 11-13/16 in. Min. - 118 in. max. length; 13/16 in. min. to 48 in. max. width; 13/64 in. min. to 3 1/2 in. max. thickness. ~~ Pos. #1 - Infeed Conveyor: 60 in. Length x 51 in. width PVC covered 3 in. Die. Rollers; adjusted variable speed from 6 - 35 FPM, 0.33 HP drive motor. ~~ Pos. #2 - Top & Edge Panel Cleaning Machine: fixed linear blower at inlet, top de-ionizing bar; the machine in compliance with IP55. ~~ Pos. #4 - GIARDINA DUALTECH 601 Dry Automatic Spray Machine with: 51 in. Width cap., 2-1/4 in. max height. Sprays using (2) reciprocating trolleys to carry (4) KREMLIN adjustable guns each (8 guns total), variable speed & acceleration by control panel. ~~ Lexan hood to cover the exit conveyor and the belt cleaning system; it may be opened for inspection; EEX-d electric motors(except for fans and pumps which are IP 55). ~~ The suction tower & side suction boxes made in stainless steel (not galvanized steel sheet) as per standard execution; all (2) spray circuits for (4+4) guns are for UV products. ~~ Enclosure Booth consists of: Sandwich paneling; air is pulled in from (2) air intake ducts (positioned between guns) above the slanted perforated roof top panels which help to reduce turbulence; large front viewing window/access panel. ~~ Conveyor: Max. working width of 1,300 mm, (1) self-guided non-sticky & non-static special synthetic conveying belt of 1,900 mm width; wet-on-wet fully extractable conveying belt cleaning system without any abrasive action (patented). ~~ Total recovery of the lacquer deposited on the belt with the possibility to reuse it in the spraying circuit. - Rapid repositioning of the conveyor belt system thanks to the special design of the frame. ~~ (2) Spraying systems: Reciprocating gun movement controlled by brushless motor, spray circuit designed for (4 + 4) guns, with the possibility to spray with different kind of lacquer products through different circuits. ~~ Distance between the centers of the gun supporting plates: 2,300 mm. Gun plate height adjustment system; electronic control for the automatic spraying & continuous reading of the piece dimensions. ~~ Pos. #4: Suction hood 1,000 mm, Lexan transparent hood, removable. Size: 3,500 x 1,680 x 250 h. [Ref. #FS-010340] - Take advantage of the exchange rate and buy Used in the USA ~~YMFG: 2001; Very good condition


Listing ID: LA834738
To view contact information to this listing,
ENTER YOUR EMAIL ADDRESS AND CLICK GO :


Quantity Units Frequency
1 each One Time Only
Price Funds Per Unit
185,000.00 USD each


NOTE : This is an archived listing and the details of the listing are outdated and no longer valid.
ID TYPE ITEMS ( Found : 487 ) DATE
LA835227 Available CNC PtP Machining Center - BUSELLATO, JET 3006 . 2008-08-28 14:59:00
LA835224 Available CNC PtP Machining Center w/ATC - WEEKE, Venture 1. 2008-08-28 14:52:00
LA835223 Available CNC Router w/ATC - CR ONSRUD, 122C18. 2008-08-28 14:48:00
LA835220 Available Finger Jointer - Western Machinery, WM. 2008-08-28 14:44:00
LA835199 Available Moulder - WEINIG H30XL . 2008-08-28 12:17:00
LA835198 Available Moulder (Feed Through) - WEINIG Powermat 500. 2008-08-28 12:12:00
LA835196 Available Tenoner/End Matcher - FRIULMAC, Randomat-E. 2008-08-28 12:06:00
LA835178 Available Cutoff Saw (Optimizing) -DIMTER. 2008-08-28 10:59:00
LA834936 Available top & bottom glue spreader. 2008-08-27 10:52:00
LA834933 Available Radial arm countertop saw. 2008-08-27 10:39:00
LA834747 Available Edgebander - POLYMAC Akron 855. 2008-08-26 15:49:00
LA834739 Available Complete Sawmill. 2008-08-26 15:23:00
LA834738 Available Spray Machine - GIARDINA, 4' Dualtech 601 . 2008-08-26 15:07:00
LA834737 Available 2-Pass Door Sizing Line - SCMI. 2008-08-26 15:05:00
LA834735 Available CNC Router W/ATC & Boring - KOMO. 2008-08-26 14:59:00
LA834733 Available Thermal Oxidizer - DܒR Model RTO RL. 2008-08-26 14:55:00
LA834729 Available UV Roll Coat Finish Line - USITAL. 2008-08-26 14:45:00
LA834728 Available 2-Pass Door Sizing Line - SCMI. 2008-08-26 14:38:00
LA834721 Available Edgebander . 2008-08-26 13:44:00
LA834719 Available T & B Planer . 2008-08-26 13:39:00
LA834711 Available Finger Jointing System . 2008-08-26 13:02:00
LA834695 Available CNC Router (4-Axis) - SCMI, Record 132 TVN . 2008-08-26 12:18:00
LA834694 Available Flat Table Machine . 2008-08-26 12:14:00
LA834691 Available CNC Router W/ATC & Boring - BIESSE Arrow TCR . 2008-08-26 12:10:00
LA834688 Available Knife Planer/Sander - TIMESAVERS Model 7325-43-21. 2008-08-26 12:06:00
« Previous | More Items »
Submit an inquiry/message to the Forum
Wood Working/Wood Industry Equipment (Used) Newsgroup
Join this Forum


www.scrapchina.com
Email FeedBack Privacy Policy Main Menu

Qingdao Jinnoc International Exhibition Co Ltd             Hydrogen Conference 2025 - LA1373451


           The 4Rs Discussion Group


cooksmill
File No:
Last modified
Another Scrap.Net Venture!